How to join two HDPS skirting boards? A simple and attractive way

Finishing a floor requires attention to detail, and one of the most important elements is joining skirting boards neatly. Many people wonder how to join two lengths on a straight wall so that the joint is barely noticeable. Although traditional cutting methods are popular, there is a much faster and more precise way to achieve a perfect finish.

What is the proper way to join HDPS skirting boards?

In practice, installers use two approaches to joining HDPS skirting boards:

1. Cutting at a 45-degree angle – a traditional method that involves cutting the edges of both pieces being joined. It requires great precision and the right tools (e.g. a mitre box or mitre saw). Its main drawback is that adjustments are difficult later on – if the wall or floor is uneven, fitting the profiles precisely becomes complicated.

2. Joining factory-finished ends (square cuts) – a much simpler and more reliable technique. It involves placing the factory-cut edges of the skirting boards together without making any additional cuts along the joint. This ensures the surfaces fit together perfectly and allows you to adjust the position of the pieces freely during installation.

Benefits of joining skirting boards using factory-finished edges

• Time-saving: No need to measure precisely or cut angles when making straight joints.

• Easier adjustment: You can move and align both skirting boards freely in relation to each other and to the wall.

• Lower risk of mistakes: Avoids damage to the lacquered finish on the edges that can result from incorrect cutting.

• Seamless finish: Any tiny gap can easily be concealed with acrylic filler and lightly painted over.

How to join skirting boards step by step

1. Prepare the surface: Make sure the lower part of the wall is clean, dry and free of grease.

2. Apply the adhesive: Apply a high-quality installation adhesive to the back of the first skirting board and press it against the wall.

3. Fit the second piece: Position the second skirting board so that its factory-finished edge sits directly against the end of the first board.

4. Adjust the position: Align both skirting boards along the floor and wall, ensuring the profile flows smoothly across the joint.

5. Conceal the joint (optional): If the joint is still slightly visible, fill it with a thin layer of finishing acrylic, smooth the surface and, once dry, lightly paint over it.

Products used

• Cezar Skirting Board 80 x 14 mm, Matte White, 2.44 m – an elegant matte MDF skirting board with a versatile profile that provides a durable, attractive finish to any interior.

• Expert White Installation Adhesive 290 ml, Creativa by Cezar – a professional adhesive with high initial tack, ensuring the skirting boards are securely fixed to the wall.

Summary

Joining HDPS skirting boards neatly does not require complicated mitre cuts. Using the boards’ original factory-finished ends saves time and allows for precise fitting. Explore Cezar’s range of finishing profiles and installation products to complete your home improvement project with ease.